LG Sonic Algae Controller, whose main purpose is to provide Healthier Water,  is based on the ultrasonic device, which started with loudspeakers above the water with an action radius of  upto 15 metres. By the end of the last century it was improved by an underwater ultrasonic waves emitting transducer, developed by a specialized producer of this kind of underwater speakers for various purposes.

From the already well known such products originated the present Algae Controller and the other devices for bigger and smaller water volumes, mentioned here, all updated according to the newest advanced techniques This product is in great demand due to moderate pricing, the general usefulness and its reputation.

Why LG Sonic Algae Controller

• Completely Environment friendly
• Causing no harm to any other forms of life
  
• Energy Consumption-Very Low
  
• Maintenance cost-minimal
  
• Well usable for both small and large surface areas
  
• Possibility of incorporation of solar installations
  
• Large reduction in use of chemical used
  
• Dissolution of bio forms and hence will have no chance to form any more.
  
• Clogging Free filters, drippers etc from algae
  
• Free Site plan assistance
  
• Our Customer Support, installation help

How It Works

It is simple, easy to use, environment friendly way of killing algae of all types including the poisonous algae.

The units transmit a complex pattern of ultrasonic vibrations into the water. Every single celled organization will start to vibrate along with the frequencies sent into water. Vibration causes algae to die.Difference between dead cell and living cell is visible on picture.It’s a fact that sound travels faster in water as compared to air, hence the water surface will act like a mirror bouncing the sound back to the water.

Present Uses for Algae Controller

Our product has found its way already in numerous applications and regularly new fields of applications are discovered. This strong ultrasonic algae killer is doing its work at the moment up to 100 meters in

• Industrial water supplies
  
• Lakes
  
• Ponds
  
• Cooling towers
  
• Drinking water storages
  
• Swimming pools (Olympic size)
  
• Recycling water containers
  
• Water purifying systems
  
• Raceways for aquacultures
  
• Wastewater recycling plants
  
• Water storages for the horticulture industry
  
• Irrigations installations for the garden industry

Technical data

Range: 100 m. all around (horizontal and vertical)

Power consumption: 45 Watts

Input: 220 or   120 V.

Cable length: 17 metres

Installation Process:

The electronic box has to be mounted in a dry, covered place. After putting the plug from the transducer cable into the corresponding socket of the electronic box, the float with the transducer can be put in a suitable place into the water in such a way that the front “looks” through the water mass and covers as much as possible of the water that has to be treated.  The vibration beams leave the transducer in an arc of 180 degrees

If everything is fixed according to the instructions, the relevant plug from the electronic box can be put into the mains (220 or 120). From this moment on the device is in operation and within a day or two you may already observe the first results under a microscope.